+86 15359293870 2804538582@qq.com
Industrial equipment parts procurement network

INDRAMAT drives HVE02.2-W018N/S201 continuous mechanical output

$2,580.00

80 in stock

TVD 1.3 can operate on a 3 x AC 380.480V power system, at 50… 60Hz, without a transformer.

SKU: HVE02.2-W018N/S201

The high-voltage link rectifies the three-phase mains AC and provides a

regulated DC bus circuit voltage for the power feed to the drives. A buffer

capacitor takes care of any necessary smoothing.

When the drives are in generator mode, the regenerated power is absorbed

by the bleeder resistor and transformed into heat.

INDRAMAT drives HVE02.2-W018N/S201 continuous mechanical outputillustration

The drives can be disconnected from the mains by the TVD’s internal power

contactor.

The TVD 1.3 provides the +24VL and +/-15VM for all connected drive

modules.

 

In the event of a power failure, the signal voltages are supplied from the DC

bus circuit. Therefore, as the drives operate as a generator, the electronics of

the drives remain functional.

The TVD 1.3 is equipped with extensive monitoring functions. These

communicate with the drive modules via the wire ribbon cable.

The Bb1 contact is critical to the ready state of the drive system. The power

contactor cannot be energized until the Bb1 contact is closed.

 

DKC01.1-030-3-FW
DKC01.1-040-7-FW
DKC01.3-016-7-FW
DKC01.3-040-7-FW
DKC02.1-040-7-FW
DKC02.3-016-7-FW
DKC02.3-200-7-FW
DKC03.3-016-7-FW
DKC03.3-100-7-FW
DKC03.3-200-7-FW
DKC04.3-016-7-FW
DKC04.3-040-7-FW
DKC04.3-100-7-FW
DKC04.3-200-7-FW
DKC06.3-016-7-FW
DKC06.3-040-7-FW
DKC06.3-100-7-FW
DKC06.3-200-7-FW
DKC11.3-200-7-FW
DKC21.3-016-7-FW
DKC21.3-040-7-FW
DKC21.3-100-7-FW
DKC21.3-200-7-FW



    Customers reviews

    There are no reviews yet.

    Be the first to review “INDRAMAT drives HVE02.2-W018N/S201 continuous mechanical output”

    Your email address will not be published. Required fields are marked *

    Search for products

    Back to Top
    Product has been added to your cart