1VCF752000 ABB Positioning controller

The I/O modules have open ventilated plastic enclosures and a bottom of sheet

metal. On the front of each I/O module there is one LED (STATUS) indicating the

module status and digital I/O modules have one status LED for each channel. Refer

to Hardware Indicators on page 47 for the status indication of the LEDs.

An electronic type designation ID in each module keeps the I/O module from being

taken into operation by the ModuleBus master, if a module’s ID doesn’t match the

configured module type definition.

Refer to specifications in Appendix A, Specifications for more information.

The module can be mounted on a standard DIN rail. The module is locked to the

DIN rail by using the locking screw.

The process connection is done via detachable connectors.

Each I/O module is installed on an MTU. Table 2 shows the MTUs that can be used

with each I/O module type. I/O modules do not have any jumpers or switches that

need to be set before installing on an MTU. Refer to Appendix A, Specifications for

more information.

I/O modules are installed by aligning the connectors of the MTU and I/O module

and then pushing the units together. After connected to the MTU, the I/O module is

then locked in place by the I/O Module Lock/Switch which also activates a switch

to enable power to the I/O module.

S800L I/O Modules

The I/O modules are installed directly on the DIN rail and locked with the locking

screw. The process signal are connected to a pluggable connector on the module.

There are no jumpers or switches that need to be set.

The I/O module automatically set up the address for the next I/O module.

To enable 2- and 3-wire connection to 16 channels DI and DO modules, TU805 is

used. TU805 is mounted directly on the module.

The prices of all products of Zhangzhou Fengyun may fluctuate at any time. The specific price is subject to the customer service quotation. Please confirm the model, product, price and other details with the customer service before placing the order. Second-hand and brand-new products are sold in the store. Please contact the customer service for details.

operates automation modules, cards, CPU, PLC, DCS of European and American brands, and distributes products widely used in electronics, metallurgy, chemical, power plants, steel plants, rubber, cement, mechanical equipment, construction and other industries.

It has established close cooperative relations with many internationally renowned PLC product maintenance service providers, including North America, Europe, Asia, etc.

Recommended ABB related models：