CSG2003-45A01 ABB For signal transmission configuration

Used screened cables for digital signals, which are longer than 3 m and for all analog signals.
Connect each screen at both ends by metal clamps or comparable means directly on clean metal
surfaces, if both earthing points belong to the same earth line. Otherwise, connect a capacitor to
earth on one end. In the converter cabinet this kind of connection must be made directly on the sheet
metal close to the terminals and if the cable comes from outside also on the PE bar. At the other end
of the cable, connect the screen well with the housing of the signal emitter or receiver.
Run the motor cable away from other cable routes. Motor cables of several drives can be run in parallel
installed next to each other. Motor cables, input power cables and control cables should be installed on
separate trays.
Avoid long parallel runs of motor cables with other cables to decrease electromagnetic interference caused by
the rapid changes in the drive output voltage.
Where control cables must cross power cables, ensure they are arranged at an angle as close to 90 degrees
as possible. Do not run spare cables through the drive or cabinet.
The cable trays must have good electrical bonding to each other and to the grounding electrodes.
Aluminum tray systems can be used to improve local equalizing of potential.
The following diagrams show the proper routing of cables.

The prices of all products of Zhangzhou Fengyun may fluctuate at any time. The specific price is subject to the customer service quotation. Please confirm the model, product, price and other details with the customer service before placing the order. Second-hand and brand-new products are sold in the store. Please contact the customer service for details.

operates automation modules, cards, CPU, PLC, DCS of European and American brands, and distributes products widely used in electronics, metallurgy, chemical, power plants, steel plants, rubber, cement, mechanical equipment, construction and other industries.

It has established close cooperative relations with many internationally renowned PLC product maintenance service providers, including North America, Europe, Asia, etc.

Recommended ABB related models：