This LED refers to the 24 VDC power supply for the ASPC. When this LED is lit, the power supply is on but may not be within acceptable tolerance. DISABLE This LED refers to a remote disable input to the ECPSR. When the LED is lit, the -12 VDC are out of spec and the ECPSR is disabled. +15 V -15 V +5 V These LEDs refer to the presence of their respective voltages within the ASPC. When these LEDs are lit, the respective voltages are within acceptable tolerances.
The Service Workstation allows for direct interaction with the Smart Platform to allow for initial software loading, tuning of the scanner and sensors, diagnostics, and monitoring. In order to proceed with platform or sensor setup, the Service Workstation and the Smart Platform software must be activated. Once the Smart Platform software is loaded in the BRAM of the end column boards, the content has battery backup for several days, and the platform software can be repeatedly restarted by means of the RESET button on MPRC, by the power down and power up cycle, or by Service Workstation commands.
The direction and speed of the AC motor which moves the sensor head package is managed by a motor drive. It determines how much torque to apply as the head package traverses the frame. The ABB ACS-100 Motor Drive (part number 133853-001) is the replacement for both the Fincor and Lovejoy motor controllers. It uses a removable digital control panel (MDPanel) to set the various tuning parameters.
Motor drive assemblies shipped from Columbus, Ohio, arrive preprogrammed with the standard Smart Platform setup. These settings should provide proper performance for all scanners except Smart U-Frames. For Smart U-Frames, the values for Parameters 202 and 306 must be entered manually. Should any tuning parameters change, it will be necessary to rerun the Motor Drive Tuning routine (ft) in the software.
There are no reviews yet.