+86 15359293870 2804538582@qq.com
Industrial equipment parts procurement network

IS200BICRH1A GE Embedded Ethernet interface

$1,099.00

In stock

model:IS200BICRH1A

Order (minimum order quantity): 1

Payment: telegraphic transfer
Product origin: Sweden
Port of shipment: Xiamen, Fujian
Hotline: 18165687102

E-mail:2804538582@qq.com

In an SNTP system, a computer on the network (called an SNTP server) sends out a periodic timing
message to all SNTP-capable Ethernet Interfaces on the network, which synchronize their internal
clocks with this SNTP timing message. If SNTP is used to perform network time synchronization, the
time-stamp information typically has ±10ms accuracy between controllers on the same network.
Synchronizing the CPU TOD clock to an SNTP server allows you to set a consistent time across multiple
systems. Once the CPU TOD clock has been synchronized with the SNTP time, all produced EGD
exchanges will use the CPU TOD current value for the time-stamp.
The CPU TOD clock is set with accuracy within ±2ms of the SNTP time-stamp.
TOD clock synchronization is enabled on an Ethernet module by the advanced user parameter (AUP),
ncpu_sync. The CPU must also use a COMMREQ in user logic to select an Ethernet module as the time
master. For additional information, refer to Time-stamping of Ethernet Global Data Exchanges in
PACSystems RX7i, RX3i and RSTi-EP TCP/IP Ethernet Communications User Manual, GFK-2224 Chapter 4.
A software watchdog timer in the CPU is designed to detect failure to complete sweep conditions. The
timer value for the software watchdog timer is set by using the programming software. The allowable
range for this timer is 10 ms to 2550 ms; the default value is 200 ms. The software watchdog timer
always starts from zero at the beginning of each sweep.

IS200BICRH1A GE Embedded Ethernet interfaceillustration
The software watchdog timer is useful in detecting abnormal operation of the application program
that prevents the CPU sweep from completing within the user-specified time. Examples of such
abnormal application program conditions are as follows:
▪ Excessive recursive calling of a block
▪ Excessive looping (large loop count or large amounts of execution time for each iteration)
▪ Infinite execution loop
When selecting a software watchdog value, always set the value higher than the longest expected
sweep time to prevent accidental expiration. For Constant Sweep mode, allowance for over sweep
conditions should be considered when selecting the software watchdog timer value.
Refer to the Appendix A-3.6 for EGD Sweep impact and EGD processor utilization for EGD exchanges
configured on Embedded Ethernet interface of the RX3i CPE305/310 and RSTi-EP CPE100.
The watchdog timer continues during interrupt execution. Queuing of interrupts within a single sweep
may cause watchdog timer expiration.
If the software watchdog timeout value is exceeded, the OK LED blinks, and the CPU goes to STOP-Halt
mode69. Certain functions, however, are still possible. A fault is placed in the CPU fault table, and
outputs go to their default state. The CPU will only communicate with the programmer; no other
communications or operations are possible. To recover, power must be cycled on the rack or
backplane containing the CPU.

 

The prices of all products of Zhangzhou Fengyun may fluctuate at any time. The specific price is subject to the customer service quotation. Please confirm the model, product, price and other details with the customer service before placing the order. Second-hand and brand-new products are sold in the store. Please contact the customer service for details.

 

IS200BICRH1A GE Embedded Ethernet interfaceillustration1

Recommended GE related models:

IS200AEADH4ADA
IS200DTAIH1ACC
IS200DTAOH1ABA
IS200EGDMH1AFF
IS200EGPAG1BCA
IS200EPSMG1AEC
IS200EPSMG1AED
IS200EPSMG2ADC
IS200EPSMG2ADO
IS200EPSMG2AEC
IS200ERDDH1ABA
IS200ERIOH1AAA
IS200EROCH1ABB
IS200JPDDG1AAA
IS200PMCIH1ABA
IS200SAMBH1ABA
IS200SDIIH1ADB
IS200SRTDH2ACB
IS200AAAH1A
IS200AEPAH1BKE
IS200AEPCH1A
IS200AEPCH1ABC
IS200AEPCH1CCB
IS200ATBAG1A
IS200ATBAG1AAA
IS200ATBAG1BAA1
IS200AVGAG1AAA
IS200AVGBG1A
IS200AVGBG1AAA
IS200AVIFH1A
IS200AVSCG1A
IS200BAIAH1B
IS200BAIAH1BCB
IS200BAIAH1BDC
IS200BAIAH1BEE
IS200BICHH1A
IS200BICIH1A
IS200BICIH1ADB
IS200BICIH1ADC
IS200BICIH1AEC
IS200BICLH1A
IS200BICLH1ACB
IS200BICLH1AEC
IS200BICLH1AFD
IS200BICLH1AFE
IS200BICLH1B
IS200BICLH1BAA
IS200BICLH1BBA
IS200BICMH1A
IS200BICMH1AAA
IS200BICRH1A
IS200BLIGH1A
IS200BLIGH1AAB
IS200BPIAG1A
IS200BPIAG1AEB
IS200BPIBG1A
IS200BPIBG1AEB
IS200BPIHH1A
IS200BPIHH1AAA
IS200BPIIH1A
IS200BPIIH1AAA
IS200BPIRG1A
IS200BPIRG1AAA
IS200BPPBH2B
IS200BPPCH2AEC
IS200BPVAG1B
IS200BPVCG1B
IS200BPVCG1BR1
IS200BPVDG1BR1
IS200CABPG1A
IS200CABPG1ACA
IS200CABPG1B
IS200CABPG1BAA
IS200CPFPG1A
IS200CPFPG1AAA
IS200CPFXG1A
IS200CPFXG1AAA
IS200CSLAH1APR1
IS200CSLAH4A
IS200CSLAH4AAA
IS200CTBCG1A
IS200CTBCG1AA
IS200CTBCG1AAA
IS200CVMBG1A
IS200CVMBG1AAA
IS200DAMAG1A
IS200DAMAG1ACA
IS200DAMAG1B
IS200DAMAG1BBA
IS200DAMAG1BBB
IS200DAMAG1BCB
IS200DAMBG1A
IS200DAMBG1ABB
IS200DAMCG1A
IS200DAMCG1ACB
IS200DAMDG1A
IS200DAMDG2A
IS200DAMDG2AAA
IS200DAMEG1A
IS200DBIAG1ABB
IS200DRLYH1A
IS200DRLYH1AAA
IS200DRLYH1AED
IS200DRTDH1A
IS200DRTDH1ABA
IS200DSCBH1A



    Customers reviews

    There are no reviews yet.

    Be the first to review “IS200BICRH1A GE Embedded Ethernet interface”

    Your email address will not be published. Required fields are marked *

    Search for products

    Back to Top
    Product has been added to your cart